Sunday, March 14, 2010

Stuck seat post

Anyone got any sure fire ways of un-stucking an aluminum seat post
from a steel frame that's not too destructive?

7 comments:

Hughie said...

I would just put some loosening oil around the seam and let it seap into the gap over night. Try wiggling around the next day, repeat until it frees up.

out of curiosity, which bike has the issue? is it frozen? left unused? or just general old stuckage?

Jerome said...

Thanks Hughie. I've tried that a bit, to no avail. I'll keep going with it. I'm half wondering if my next step is to head up the seat tube and hope it get's hotter faster than the seat post, so it'll expand and I can quickly pull it out.

BTW....this is on the mystery bike....

coastkid said...

i had a USB post sieze in the pugsley and had to use a plumbers stilson wrench...its teeth leftsome small marks on the post even tough i used a rag...

Easton Heights Blogger said...

soak, soak, SOAK! liquid wrench type stuff, or anything like it. if you were to try heating it, you would have to heat the FRAME, not the seatpost, and if you have paint on the frame, well, it's done.
the difficult thing about stuck seatposts is the huge amount of surface area for galvanic corrosion to form. there is a chemical bond there now.
there were times in the bike shop we'd have to resort to a long monkey wrench; the harder you pull, the tighter it bites, so you'll either snap the post, remove it, or twist the frame out of alignment.

Vik said...

Here are 15 ways:

http://www.sheldonbrown.com/stuck-seatposts.html

Tamia Nelson said...

Dave Moulton has a good article on the subject:

http://davesbikeblog.squarespace.com/blog/2010/1/28/removing-a-stuck-seat-post-or-handlebar-stem.html

Anonymous said...

Hey Jerome,

Has it worked for you yet? If so what method did you employ.

B